ultrasonic cell disruptor 20Khz

The ultrasonic cell disruptor is made up of two ultrasonic generator and transducer used for ultrasonic smashing machine

  The principle of energy-gathering ultrasonic transducer is same as the welding transducer. It is through exerting pre-stress to offset the swelling stress of piezoelectric ceramics and generate high frequency vibration with large amplitude. While it gathers energy and launch out in the smaller end of transducer, thus the partial acoustic-power rate is very big. So it requires high quality material and fine technique. It belongs to the high-power ultrasonic transducer. The transducer together with the booster and smaller diameter horn formed a vibrating system of partial high power and great oscillation amplitude, so as to realize ultrasonic smashing, extraction, emulsification, metal processing, etc. 

         Energy gathering ultrasonic transducer works in gaps or says work by pulse, it belong to high-power transducer. Generally its amount of power is calculated by the instantaneous peak power.  

Type	Frequency(KHz)	Capacitance(pF)	Impedance(Ω)	Power(W)	Insulation impedance(2500VDC)	Notes
HNT-8AE-2520(5X4)	20.0±0.5	2700±10%	≤30Ω	100	100MΩ
HNT-4AE-2520(5X4)	20.0±0.5	3650±10%	≤25Ω	200	100MΩ
HNT-8SS-3030(5X4)	30.0±0.5	7500±10%	≤20Ω	300	100MΩ
HNT-4AE-3535(5X2)	35.0±0.5	4500±10%	≤25Ω	200	100MΩ
HNT-4AE-3040(5X2)	40.0±0.5	4000±10%	≤25Ω	200	100MΩ
HNT-4SE-3050(5X2)	50.0±0.5	4500±10%	≤25Ω	200	100MΩ
HNT-8AE-4020(5X4)	20.0±0.5	9500±10%	≤25Ω	350	100MΩ
HNT-8AE-4020(5X6)	20.0±0.5	13800±10%	≤18Ω	500	100MΩ
HNT-8AE-4520(5X4)	20.0±0.5	12000±10%	≤22Ω	600	100MΩ
HNT-8AE-4520(5X6)	20.0±0.5	18000±10%	≤18Ω	800	100MΩ
HNT-8SS-5020(6.5X4)	20.0±0.5	9600±10%	≤15Ω	1000	100MΩ
HNT-8AS-5020(7X4)	20.0±0.4	9000±10%	≤15Ω	1000	100MΩ

1